FB-39 SPLIT SET BOLTGalvanizing and Black Split Set Bolt with different length are available. Made by high-grade of steel material, our split set bolt can get a very good zinc coating surface to have a better performance when it is used in corrosive environment.             The standard packing for FB-47 Split set bolt is 150 untis per wooden or metal pallet.As a main reliable ground support Split Set Bolt used in applications, Dia.47mm C pipe of bolt body is the most crediable and reasonable size which can offer a perfect and safety way for ground support, so it is widely used in mines, tunnels and slopes etc. However meanwhile, the material strength and characteristic, and the welds quality between ring and the C tube, become critical points on the .As the biggest manufacturer and supplier of Split Set products in China, we have a long-term relastionship and co-operation with our local steel mill who can supply us high quality strengthen steel strip with a very low level of Si and P in chemical components, to make sure good performance of material and let it more suitable for galvanizing to keep a good quality of Zinc Coating.FB-47 SPLIT SET BOLT FEATURES1. What is Combi Plate and how does it make ? The tubular C shape of the bolt generates a load transfer from the steel to the rock when installed into a slightly smaller diameter hole, and results in a frictional resistance pull-out load of the tube from the hole, and creating a full length radial pressure to the hole by increasing the contact surface of the steel to the rock due to its tubular shape, and when install onto the plate, it establishes a compressive force against the rock. When additional load bearing capacity is required, friction bolt can be grouted by cement grouts.2. How to use and assemble ? A pull collar fixing at the ring end enables load testing during the bolt installation. The tapered end of friction bolt can be easily inserted into the drilled holes. Friction bolt can be installed with either hand held or mechanized equipment, such as a jackdrill, a stopper, a roof bolting jumbo, or any other type of drill.Latest NewsFB-39 SPLIT SET BOLT SPECIFICATION AND MECHANICAL PROPERTY

Dimensions				Physical Properties					Technical Data
Bolt Diameter	A		47mm	Yield Strength		Min. 345 Mpa (120KN)			Recommended Normal Bit Size		41-45mm
Bolt Length	B		0.9-3.0m			Typical 445Mpa(150KN)
Taper End Diameter	C		38mm	Tube Ultimate Tensile Strength		Min. 470 Mpa (160KN)			Typical Breaking Capacity		178KN
Taper Slot Wide	D		2mm			Typical 530Mpa(180KN)
Taper Length	E		100mm	Mass per Meter		2.71 Kgs			Min. Breaking Capacity		133KN
Bolt Slot Wide	F		25mm
Ring Location	G		8mm	Cross Section Area		345 mm²			Recommended Initial Anchorage		6-10 Tons               (53-89 KN)
Material Guage	H		3/3.2mm
Ring Wire Guage	I		8mm	Hole Diameter Range		43-45.5mm			Ultimate Axial Strain		Typical 21% (Thk<16mm)
Ring Open Gap	J		6-7mm

 

Code	Bolt Description			Diameter	Length	Surface Finish		Weight	Packing   QTY/Pallet		Ring ColorID
				(mm)	(mm)			(Kgs)
FB47-0900	Split Set Bolt 47-900			47	900	Untreated		2.50	150		­-
FB47-1800	Split Set Bolt 47-1800			47	1800	Untreated		5.10	150		­-
FB47-2100	Split Set Bolt 47-2100			47	2100	Untreated		6.10	150		­-
FB47-2400	Split Set Bolt 47-2400			47	2400	Untreated		6.70	150		­-
FB47-3000	Split Set Bolt 47-3000			47	3000	Untreated		8.60	150		­-
FB47-0900G	Split Set Bolt 47-900 HDG			47	900	Hot Dip Galvanized		2.60	150		­-
FB47-1800G	Split Set Bolt 47-1800 HDG			47	1800	Hot Dip Galvanized		5.50	150		Red
FB47-2100G	Split Set Bolt 47-2100 HDG			47	2100	Hot Dip Galvanized		6.40	150		Green
FB47-2400G	Split Set Bolt 47-2400 HDG			47	2400	Hot Dip Galvanized		7.05	150		­-
FB47-3000G	Split Set Bolt 47-3000 HDG			47	3000	Hot Dip Galvanized		9.00	150		Yellow

FB-47 SPLIT SET BOLT FEATURES ●Made by High Tensile Steel, and different grade of material available depends on different use environment to save the cost of ground support ●Split Set Bolt is the most easy and effective way for ground support, it's C shape body providing an instant full length ground support all the way to the hole,  using together with mesh and plate to get a quick assemble and good support function ●Galvanizing and untreated Split Set Bolts are both available ● Full range of accessories availableWith more than 10 years experiences and technology in this field, our advantage PLC-Controled Rollformer and Auto Welders can make sure our split set bolt to meet the top-ranking international standard requirements, and get credit for a consistant good quality and service and become a suppllier of many famous mining companies from different area and countries in the world.Welds quality is a very critical point for the split set bolt which will affect the performance of the bolt while used in ground support. We have a routine quality mornitoring and warning system to get a consistance and stable perfect welds quality, and a job traveller with pull testing records will go through the whole processes to avoid any accidents in the production.2. How to use and assemble ? A pull collar fixing at the ring end enables load testing during the bolt installation. The tapered end of friction bolt can be easily inserted into the drilled holes. Friction bolt can be installed with either hand held or mechanized equipment, such as a jackdrill, a stopper, a roof bolting jumbo, or any other type of drill.